SurfaPaint ThermoDry Metal Paint

SurfaPaint ThermoDry Metals can be used directly on all types of ferrous metals. On non-ferrous metals such as aluminium and on freshly galvanised steel, a primer should be used. Preparation: Ensure all surfaces are clean and dry prior to application. Remove any loose rust or flaking paint with abrasive paper or a wire brush. Painted surfaces should be sanded prior to application. Remove any dust, dirt and degrease with white spirit. No primer is required. Application note: Stir well before application. If thinning is required add up to 5% water by volume. Apply 2 to 3 even coats using a good quality brush, roller or by spraying with a tip of a diameter 1,4mm or more. Do not overbrush. Ensure corners and edges are adequately covered. Additional coats should be applied 3 hours after the previous application. Spreading Rate: 8 m2/L per coat Available Packaging: 10L pails.